Skip to main content

diagnosis-GLO

Diagnosis

The Diagnosis parameter (AutoDiagnostics) can take one of the following values when you run reconciliation.

  • Diagnosis\=0: The reconciliation results are not diagnosed.
  • Diagnosis\=1: The two most severe measurement errors are noted in the log file. Trace must also be set to 1. If Trace is set to 2, then details of all severe errors are listed in the log file.
  • Diagnosis\=2: (Auto-rejection) Mark the most severe measurement errors as out of service and do the reconciliation calculation again with the next measurement. Repeat process until the severity of the balance points is between -1 and +1, inclusive.